2019 Conference Presentations

The recordings of these presentations is proudly sponsored by Simtars

Hanrahan – Nitrogen Foam Table


Clive Hanrahan
Operations Manager – Mine Inertisation, Queensland Mines Rescue Service

Due to the mining environments in some underground operations, particularly longwalls, where the void space in the goaf becomes wider and longer, the potential for spontaneous combustion and fire events is possible and, in some cases, has happened.

The nitrogen foam table is relatively quick to deploy, set up and become operational delivering the gas mixture to the required area. The water in-foam cools the heating whilst the nitrogen gas displaces the oxygen.

Using the nitrogen foam table supplies a medium of water foam and nitrogen gas. The water in-foam cools the heating – one leg of the fire triangle whilst the nitrogen gas displaces the oxygen – second leg of the fire triangle.

The nitrogen foam table allows for the distribution of the gas/foam mixture to either one borehole or by opening secondary valving, an additional borehole can be treated at the same time. Where a spontaneous combustion/fire event has been identified mid pillar, the utilisation of the table to treat two boreholes at the same time will greatly assist in the reduction or elimination of that event.

When drilling boreholes from the surface into underground voids the nitrogen foam table allows the gas/foam mixture to be utilised to create an inert shield whereby the foam acts as a wetting agent to prevent any incendive sparking during the drilling process & the gas displaces any potential oxygen present.

In mining areas: Such as the maingates of longwalls where there is oxygen contained within the airwash zone the gas foam mixture could be utilised to create a “plug” behind the maingate face end shields which would reduce / eliminate any airwash issues. The table can be readily located adjacent to a seal site either prior to or after the seal installation. The gas/foam mixture can be distributed from the nitrogen foam table via piping through the erected seal or hosing through the proposed seal site.

You may also like

Goonawardene/Elliot - Proactive Floor Fracturing Using UIS Drilling
Rav Goonawardene Geology and Geotechnical Superintendent, Anglo American – Grosvenor Mine Ben Elliot Trainee ERZ ...
Zanette/Batterson - Broadmeadow Battery Electric Vehicle for UG Coal
Dave Zanette Project Supervisor, BMA Andrew Batterson BMA Engineering The Broadmeadow Battery Electric Vehicle ...
Ramsay - Diamond Wire Saw Mobile Unit
Matt Ramsay Drilling Superintendent – Gas, Anglo American – Moranbah North Mine The Problem The rehabilitation of ...
Lansdowne - Blind Intersection Warning LED Indication
Rod Lansdowne Outbye Electrical Coordinator The Problem A recent incident report identified a “Near Miss” at an ...
Conference Dinner – Innovation and Health Program Awards
INNOVATION AWARDS 2019 The aim of this Award is to recognise creative and practical solutions to safety and ...
Milestones in Safety - Fatigue Management in Action
The aim of the Workshop is to provide an interactive forum where approaches to fatigue management may be discussed ...
Hall/Elgar - Contractor Management Under the Coal Mining Safety and Health Act 1999
James Hall Partner, Ashurst Brett Elgar Counsel, Ashurst In November 2018, the Coal Mining Safety and Health Act ...
Crick - Chain of Responsibility - How the HVNL Changes Impact Mining
Terry Crick Director, Customer Engagement and Strategy, Kognent During the 12 months to the end of September 2018, ...
Gray - HPI Share – Bulkhead Failure and Managing Paste Fill Inrush Risk
Joel Gray Senior Mining Engineer – Operations, Cannington Mine, South32 Several paste backfill bulkhead failures ...
Hall - Application of Controls for the Safe Closure of Cannington Mine’s Underground Crusher Chamber
Chris Hall Superintendent Geotechnical, Cannington Mine, South32 Cannington mine is a silver lead zinc operation ...

Page 3 of 11